Four Wheel Automatic Glass Jar Capping Machine Glass and Plastic Bottle Capper Machine With Vibratory Feeder Elevator
Product Details
automatic bottle labeling machine
,automatic bottle labeling equipment
,plc bottle labeling machine
The CM140 automatic four-wheel capping machine configured with vibrating bowl cap feeding is engineered for the speed, hygiene, and flexibility demands of modern food and beverage packaging. From artisanal sauce producers running small batches to high-volume condiment lines, the CM140 delivers consistent screw cap tightening on glass jars, PET bottles, and HDPE containers — all within a food-grade 304 stainless steel platform designed for washdown environments.
The vibrating bowl excels in food applications where caps are small and lightweight: hot sauce dasher caps, syrup pour spouts, honey flip-tops, oil orifice reducers, and seasoning shaker closures. These cap types demand precise orientation before application — exactly where vibratory feeding outperforms gravity or elevator systems.
Ketchup bottles, hot sauce dashers, soy sauce dispensers, salad dressing bottles, mayonnaise jars, mustard containers. The CM140 handles threaded plastic caps with or without orifice reducers and flow-control inserts — common in condiment packaging.
Cooking oil bottles (250ml-5L), olive oil bottles with pour-spout inserts, balsamic vinegar bottles, specialty oils. Glass and PET containers are equally supported. Torque control prevents oil leakage while avoiding over-tightening that would frustrate consumers.
Honey bottles with flip-top dispensing caps, maple syrup jugs, chocolate spread jars, jam and preserve jars. The CM140's center compression device positively seats flip-top caps before the wheels engage — preventing the "cocked cap" defect common with uneven manual tightening.
Juice bottles with sport caps, cold-brew coffee bottles, dairy drink containers, kombucha bottles. Quick cap changeover supports the multi-SKU production typical of craft beverage operations.
Nut jars, dried fruit containers, spice bottles, seasoning shakers. The sealed electrical cabinet design prevents seasoning dust and fine particulate ingress that could compromise machine electronics.
Every component in the product zone meets food safety requirements:
- 304 Stainless Steel — All frame, guarding, and product-contact surfaces
- Food-Grade Lubricants — NSF H1 registered lubricants at all lubrication points accessible to the product zone
- Sealed Electrical Cabinet — IP65-rated, preventing washdown water and food dust ingress
- No Exposed Threads or Crevices — Smooth, radiused surfaces eliminate bacterial harborage points
- Quick-Release Guarding — Tool-free guard removal for sanitation access and inspection
At 30-45 bottles per minute for typical condiment and sauce containers, the CM140 keeps pace with filling lines. The 99.99% capping success rate means fewer rejected bottles and less rework at the end of the line.
Contract food packers running 20, 50, or 100+ different products benefit from the CM140's 1000+ recipe memory. Switching between a 250ml hot sauce bottle and a 500ml olive oil bottle takes under 90 seconds on the HMI — no tools, no trial-and-error adjustments.
| Parameter | Specification |
|---|---|
| Model | CM140 (Vibrating Bowl Configuration) |
| Cap Types | Screw caps, flip-tops, pour-spout caps, dasher caps, shaker tops |
| Cap Diameter | φ15-100mm |
| Bottle Diameter | 50-200mm |
| Bottle Height | 100-400mm |
| Capping Speed | 10-45 bpm |
| Capping Success Rate | ≥99.99% |
| Construction | SUS 304 stainless steel (food-grade) |
| Control | PLC + HMI |
| Power | 1500W, 110/220V, 50/60Hz |
| Dimensions | L2000 × W1000 × H2000 mm |
| Conveyor | SUS 304 belt (heavy containers) or plastic belt (light containers) |
| Metric | Manual Capping (3 workers) | CM140 Automatic Capping |
|---|---|---|
| Output (8-hour shift) | ~4,800 bottles | ~14,400-21,600 bottles |
| Torque consistency | ±30% variation | ±0.5% variation |
| Leak rate (post-shipment) | 2-5% | <0.01% |
| Labor cost (annual) | ~$45,000 (3 operators) | ~$7,500 (1 supervisor) |
| Cross-threading rate | 1-3% | <0.1% |
| Cap waste | 3-5% | <0.5% |
Q: Can the CM140 handle hot-filled bottles?
A: Yes. The CM140 can cap warm bottles post-filling (up to ~70°C, depending on cap material). For hot-fill lines, we recommend verifying cap material thermal behavior during sample testing at our engineering center.
Q: Does the vibrating bowl scratch or mark cosmetic-grade cap finishes?
A: No. The vibrating bowl track and cap contact surfaces are nylon-coated or polished stainless steel to prevent scratching. For highly cosmetic caps (metallized finishes, high-gloss), we can configure the bowl with additional soft-contact surfaces.
Q: Can the CM140 handle induction seal liners inside caps?
A: Yes. The capping head applies torque to the cap exterior without disturbing the induction liner inside. The center compression device seats the cap evenly, ensuring the liner makes full circumferential contact with the bottle rim for proper induction sealing downstream.
Q: What maintenance does the vibrating bowl require?
A: Weekly cleaning of the bowl track to remove cap dust and debris that could affect orientation. Monthly inspection of bowl vibration mounts and track wear. The bowl drive has sealed bearings requiring no routine lubrication. Track replacement is recommended every 2-3 million cycles depending on cap material hardness.
Q: Does YIMUPACK provide food-grade certification documentation?
A: Yes. We provide material certificates for all 304 stainless steel product-contact surfaces, CE/SGS certification. Additional food-safety documentation can be provided on request.
Q: Can you run sample tests with our specific sauce/oil bottles and caps?
A: Absolutely. We recommend sending a representative sample set of your bottles, caps, and labels to our Shanghai engineering center. We will configure the CM140 for your products, document all settings, and provide video of a 24-hour production test before shipment.
Q: What is the lead time for a food-grade CM140?
A: Standard configurations ship in 15-25 working days. Custom configurations (specific guarding, washdown modifications, integration with CIP systems) ship in 25-35 working days.
Mr. Tyson
Sales Manager
- Email: tyson@yimupack.com
- Tel: +86-17302103515
- WhatsApp: 8615921163554
-
WeChat:
008617302103515
- Skype: tysonjing
-
Automatic Water Bottle Labeling Equipment Sticker Printing Machine 1500BPH SS304
Automatic Labeling Machine Glass and Plastic Bottles Label Printer Sticker Machine Can Be Paired with Date Code Printing Machine YM415 Affordable Desktop Bottle Labeling Machine for Small Business | Compact Automatic Labeler YM415 compact benchtop automatic labeling machine for small business and ... -
High Speed SUS304 Automatic Round Bottle Labeling Equipment Application Machine
High Speed Automatic Round Bottle Labeling Machine Food And Cosmetic Bottle Label Applicator With OEM ODM Services YM510 High-Speed Automatic Round Bottle Labeling Machine — Industrial-Grade 6000 BPH Wrap-Around Labeling for Cylindrical Containers YM510 high-speed automatic round bottle labeling ... -
Flat Bottle Cardboard Box Container Labeling Machine Barcode Applicator
Boxs And Flat Bottles Barcode Applicator Machine Automatic Online Duplex Label Printing Machine With Customize Label Print & Encode Machine | YM320P Smart Labeling with Zebra RFID Encoder Beyond Barcode: The RFID Advantage Barcode labeling requires line-of-sight scanning — each barcode must be ... -
Double Head Bottle Labeling Equipment Automatic Round Bottle Labeling Machine With CE Certification For NECK And BODY Labeller
YM525 Quality Certifications, Factory Testing, and Manufacturing Standards A labeling machine is a precision instrument expected to apply labels within ±0.2mm of target position, tens of thousands of times, for a decade or more. The difference between a machine that maintains this accuracy and one ...
